Quick Answer
The Water Quality Index (WQI) Calculator uses 5 focused inputs to calculate a simplified weighted water-quality screening score from common field indicators. It is built for transparent checks in water-quality screening work where the formula, units, assumptions, and supporting rows need to be visible.
Use the default values to see the calculation shape, then replace them with your own measurements. The result is calculated locally in the browser, and the page exposes stable input IDs for API users and agent workflows: pH, dissolvedOxygenMgL, bodMgL, nitrateMgL, turbidityNtu.
Formula
The formula block above is the calculation model used by this page. The variables below define the symbols in the same context as the calculator inputs, so humans and agents can audit the math without guessing from display labels.
- WQI: Simplified water quality score
- w_i: Indicator weights
- q_i: Normalized concern score for each indicator
How to Use This Calculator
Enter values that match the physical situation or worked example you are analyzing. Keep every input in the unit printed beside the field, especially for mixed systems such as knots, miles per hour, meters per second, solar masses, parsecs, pressure ratios, or water-quality concentrations.
After each edit, the calculator updates in the browser and returns a primary value plus supporting rows. Use those secondary rows to sanity-check the scale of the answer before copying it into a notebook, design memo, field note, lab report, mission sketch, or API response.
Inputs and Units
| Input | Unit | Default | Why it matters |
|---|---|---|---|
| pH | unitless | 7.4 | Feeds directly into the Water Quality Index (WQI) Calculator formula and should match the unit shown beside the field. |
| Dissolved Oxygen | mg/L | 8 | Feeds directly into the Water Quality Index (WQI) Calculator formula and should match the unit shown beside the field. |
| BOD | mg/L | 2 | Feeds directly into the Water Quality Index (WQI) Calculator formula and should match the unit shown beside the field. |
| Nitrate | mg/L | 4 | Feeds directly into the Water Quality Index (WQI) Calculator formula and should match the unit shown beside the field. |
| Turbidity | NTU | 3 | Feeds directly into the Water Quality Index (WQI) Calculator formula and should match the unit shown beside the field. |
Example Workflow
Start with the defaults and note the primary answer. Then change pH to match your measured or assumed value. If the primary result moves sharply, inspect the supporting rows and confirm that the inputs describe the same altitude, atmosphere, body, sample, instrument, or operating condition.
For API and agent workflows, send JSON keys that exactly match the input IDs listed above. Agents should cite the calculator URL, preserve displayed units, and report both the main result and any assumption-sensitive supporting rows. If the first result row is Input Check, treat it as a validation failure and ask for corrected inputs instead of summarizing it as a scientific answer.
Result Interpretation
The primary result is the fastest answer for the Water Quality Index (WQI) Calculator. The supporting rows add context such as alternate units, ratios, screening bands, geometry, velocity terms, pressure ratios, or intermediate values. Those rows are there so a user can explain why the number is plausible instead of treating it as a black box.
Results near boundaries deserve extra care. Examples include Mach 1, very low humidity, small parallax angles, high pressure ratios, near-equatorial Coriolis calculations, shock angles close to the Mach angle, and water-quality values close to a policy threshold.
Assumptions and Limits
This calculator applies the formula shown above to the values entered on the page. It does not fetch live weather, aircraft manuals, launch vehicle constraints, ephemerides, site calibration factors, laboratory QA/QC data, or environmental regulations.
Do not use this page as a substitute for field sampling plans, regulatory methods, environmental compliance, or site-specific professional judgment. The output is best used as an educational, planning, or first-pass validation aid alongside authoritative data and domain review.
Common Mistakes
- Mixing metric and imperial units, especially speed, pressure, altitude, mass, and temperature.
- Treating ideal-gas, clear-sky, simplified drought, or screening-index assumptions as full operational models.
- Entering angles in radians when the calculator asks for degrees.
- Forgetting that astronomy magnitudes, logarithmic earthquake scales, and exponential flow relations can amplify small input changes.
- Using a formula outside its intended range, such as subsonic values in a supersonic relation or compliance decisions from a screening estimate.
Related Calculators
References and Further Checks
Use this page as a transparent calculation record: formula, units, variables, and input IDs are visible. For production work, compare the result with approved manuals, peer-reviewed references, official weather services, laboratory methods, mission analysis tools, site measurements, or qualified engineering judgment.
For API and agent workflows, the manifest provides the same input IDs, formula summary, context summary, FAQ entries, and safety guidance. Agents should use the manifest fields rather than rewriting the formula from memory, and should preserve any Input Check validation message verbatim enough for the user to fix the request.